Specifications
DIMENSIONS / UPC
Quantity | UPC | Width | Depth | Height | Weight | |
Each | 039564145339 | 3.60 | 1.25 | 5.40 | 0.15 | |
Inner | 6 | 10039564145336 | 6.10 | 6.50 | 3.00 | 1.10 |
Master | 48 | 20039564145333 | 7.40 | 12.30 | 13.40 | 9.65 |
Quickly repair ends on wheel studs, bolts, and threaded rod by removing burred and damaged ends
Easily repairs threads in place, eliminating the time and cost of replacing hard-to-find or expensive hardware
The 3 long lasting tungsten carbide cutting blades with a hardness rating between 88-90 HRC are durable enough to use on most metals leaving a clean thread end
Operation: Using the lowest drill gear; rotate bit between 0 - 400 RPM and apply consistent forward pressure evenly, until the damaged threads have been removed
Bit capacity of 1/8 - 3/4" (3 - 19mm) and can be used with most materials including stainless steel, aluminum, plastic, or wood
NOTE: Use above recommended RPM or with hammer/impact drills will destroy cutting edge of tool
Warranty: 90 Day
Quantity | UPC | Width | Depth | Height | Weight | |
Each | 039564145339 | 3.60 | 1.25 | 5.40 | 0.15 | |
Inner | 6 | 10039564145336 | 6.10 | 6.50 | 3.00 | 1.10 |
Master | 48 | 20039564145333 | 7.40 | 12.30 | 13.40 | 9.65 |