null
ALL
BRANDS

W85034

2-in-1 36" Z-Frame Folding Creeper

Performance Tool

This z-frame creeper converts in seconds from a creeper to a rolling seat. Low-profile for easy access under vehicles.

  • Easily converts from a creeper to rolling seat

  • Padded cushions for added comfort both lying flat and sitting upright

  • Six 2 in. (50 mm) swivel casters allow for effortless movement and added stability

  • Low profile for added clearance under vehicles

  • Powder-coated tubular steel frame with a large 12-1/2 in. x 10-1/4 in. (318 x 260 mm) cushioned headrest

  • Locking pin prevents unwanted movement, and retracts easily for quick conversion

  • Flat dimensions: 36 in. L x 16-1/2 in. W x 4-7/8 in. H (914 x 419 x 124 mm)

  • Folded dimensions: 18-1/4 L x 14-5/8 H x 16-1/2 in. W (464 x 371 x 419 mm)

  • Flat capacity: 300 lb. (136 Kg)

  • Folded capacity: 264 lb. (120 Kg)

  • Replacement casters available: Performance Tool model W85002

Warranty: 1 Year

California Prop 65 Warning
W85034- Primary

Specifications

Assembly Required No
Color Black,Red
Finish Powder Coated
Material Steel
Number of Wheels 6
Weight Capacity (lbs) 300

DIMENSIONS / UPC

Quantity UPC Width Depth Height Weight
Each 039564143373 16.5 21.25 3.5 12.1
Standard Pack 1

Documents / Instructions

1. Lay out the three Pad Assemblies (A) as shown and align the lynch pin in the bottom two sections. 2. Align the holes in the sides of the frames and insert the Hex Head Bolts (C) through each hole. 3. Thread on the Hex Locknuts (D) to the Hex Head Bolts (C) and finger tighten. Once snug, flip the creeper over so the bottom side is facing up. 4. Using any two of the Tools noted above, hold each Hex Head Bolt (C) in place, and tighten each Hex Locknut (D). Repeat for all four joints but DO NOT